Contact Information
Introduction of Heat ExchangerIntroduction of HINO heat exchanger types. Plate Heat ExchangerGas-gas heat exchanger for exhaust heat recovery Tube Heat ExchangerGas-gas heat exchanger for waste disposal and industrial refuse recycle. Shell-and-tube Heat ExchangerThe heat exchanger is used for heat recovery from combustion gas. For air and other gases, maximum operation temperature shall be 850～900℃ at heat discharging inlet. For water, maximum operation temperature can be 1300℃. Glass-tube Heat ExchangerThe structure is suitable for gas-gas, such as gaseous SO3 and HCl, heat transfer, when operating at temperatures of dew-point corrosion. Finned-tube Heat ExchangerGas-liquid heat exchanger is used to produce hot water at 60℃～90℃, hot air or waste gas as the heat source. Select finned tubes according to the temperature at heat discharging inlet. Bare-tube Heat ExchangerGas-liquid heat exchanger is used to produce warm water at 60℃～90℃. Utilize hot air or waste gas as the heat source.. Dust Removing DeviceThe equipment is mainly used to remove dust adhered and prevent the tubes from dust accumulation inside. Hot Air GeneratorHINO-PILE hot air generator with high-efficiency has made significant contributions to several energy-saving fields through long-term development. Radiation Heat ExchangerApplicable to heat recovery at high temperatures under dusty conditions Boiler Auxiliary Exhaust-heat Collector (Oil-saving fan heater)Boiler auxiliary equipment is used for heat recovering from exhaust gas, then the clean hot air given back to the ducts.
 |
|||
|
